Coronary Angioplasty

bright-pink-balsam-lfowerHere is one of my old posts elsewhere on Coronary Angioplasty. It is supplemental to my recent post at: https://cardiophile.blog/category/angioplasty/

Angioplasty is a method to remove blocks from important blood vessels. The most common form of angioplasty is coronary angioplasty, the method of removing blocks from the blood vessels supplying oxygenated blood (arteries) to the heart. Coronary angioplasty was originally described by Andreas Gruentzig in 1975. He used a balloon at the tip of tiny long tubes known catheters to dilate narrowed coronary arteries. The procedure is also known as PTCA (Percutaneous Transluminal Coronary Angioplasty). Blood vessels supplying the brain, kidneys and the limbs can also be treated by angioplasty. Coronary angioplasty is usually done when one or more blood vessels supplying the heart are critically narrowed (> 70% decrease in diameter). The most important benefit of angioplasty is symptomatic relief, rather than improvement in survival. The procedure is done under local anaesthesia. The tiny tubes used for angioplasty can be introduced into the body either through the groin or above the wrist. The tubes are threaded back into the main artery of the body called aorta and from the aorta into the coronary arteries under x-ray fluoroscopic guidance. Initially iodine containing contrast dye is injected into the vessels to visualise the sites of narrowing. Read more…

Angioplasty

woodsWhat is angioplasty?

Angioplasty is in simple terms, the removal of a block in a blood vessel. Most familiar form of angioplasty is coronary angioplasty – removal of blocks in the blood vessels of the heart.

How is angioplasty done?

Angioplasty is done using small tubes with balloons attached at the tip known as ‘balloon catheters‘. These catheters are introduced through the blood vessels in the wrist (radial artery) or the groin (femoral artery) and moved under X-ray cine imaging (fluoroscopy) to reach the destination vessel. Before passing the balloon catheter, it is usual to pass another wider catheter known as ‘guide catheter‘ and a ‘guidewire‘ through it to cross the blocked segment. The balloon catheter is then threaded on the guidewire to push it across the block. Once the balloon is across the block, it is inflated using a syringe like mechanism (indeflator – inflation deflation device). The balloon is filled with dilute X-ray contrast (iodinated dye) prior to insertion so that it can be visualized by fluoroscopy. The inflating device has a pressure gauge attached to it so that the inflation pressure can be monitored. Undue pressure within the balloon has to be avoided to prevent damage and sometimes rupture of the blood vessel.

What is done to prevent recoil of the vessel after angioplasty?

The recoil of a blood vessel after angioplasty can be prevented by implanting metallic stents within the segment from which the block was removed by angioplasty. Stents are tiny spring like structures kept in folded position like a folded umbrella and expanded using a balloon while inside the blood vessel in the desired position. Stents are mounted on balloon catheters for introduction into the blood vessel and passed through the guide catheter over the guidewire which was positioned during angioplasty.

What are the broad types of stents used?

Stents could be bare metal stents (BMS) made of nitinol, cobalt-chromium, stainless steel or platinum based alloys. For better efficacy, they can be coated with special medications which prevent recurrence of blocks at the implantation sites due to cell overgrowth. These are known as medicated stents or drug eluting stents (DES).